using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using UAS_MES_NEW;
using UAS_MES_NEW.DataOperate;
using UAS_MES_NEW.Entity;
using UAS_MES_NEW.PublicMethod;

namespace UAS_MES_NEW.Make
{
    public partial class Make_SMTStockStencil : Form
    {

        DataTable Dbfind;

        AutoSizeFormClass asc = new AutoSizeFormClass();

        DataHelper dh = SystemInf.dh;

        StringBuilder sql = new StringBuilder();

        bool ifUsed = false;

        public Make_SMTStockStencil()
        {
            InitializeComponent();
            SU_DEVCODE.Enabled = false;
            SU_DEVCODE1.Enabled = false;
            ST_ENSIONA.Enabled = false;
            ST_ENSIONB.Enabled = false;
            ST_ENSIONC.Enabled = false;
            ST_ENSIOND.Enabled = false;
            ST_ENSIONE.Enabled = false;
            Receive.Enabled = false;
            Return.Enabled = false;
            Scrap.Enabled = false;

        }

        private void Make_SMTStencil_Load(object sender, EventArgs e)
        {
            asc.controllInitializeSize(this);
            //工单号放大镜配置
            ma_code.TableName = "make left join product on ma_prodcode=pr_code";
            ma_code.SelectField = "ma_code # 工单号,ma_prodcode # 产品编号,ma_qty # 工单数量,pr_detail # 产品名称,ma_softversion # 软件版本,ma_salecode # 销售单号,pr_sendchecktype # 产品送检方式";
            ma_code.FormName = Name;
            ma_code.SetValueField = new string[] { "ma_code", "ma_prodcode", "ma_qty", "pr_detail", "ma_softversion", "ma_salecode", "nvl(pr_sendchecktype,'LineCode')pr_sendchecktype" };
            ma_code.Condition = "ma_statuscode in('STARTED','AUDITED')";
            ma_code.DbChange += Ma_code_DbChange;

            SU_DEVCODE.Focus();

        }

        private void Ma_code_DbChange(object sender, EventArgs e)
        {
            Dbfind = ma_code.ReturnData;
            BaseUtil.SetFormValue(this.Controls, Dbfind);
            Confirm.PerformClick();
        }

        private void Make_SMTStencil_SizeChanged(object sender, EventArgs e)
        {
            asc.controlAutoSize(this);
        }

        private void LoadGridData()
        {
            sql.Clear();
            sql.Append("select St_PCBCODE,su_stcode,su_table,su_status,su_linecode,su_usemacode,su_singlepringqty,su_stverison ");
            sql.Append("from StencilUse left join stencil on st_code=su_stcode where su_usemacode='" + ma_code.Text + "' and su_status='在线'");
            DataTable dt = (DataTable)dh.ExecuteSql(sql.ToString(), "select");
            BaseUtil.FillDgvWithDataTable(ToolsBom, dt);
        }

        private void Confirm_Click(object sender, EventArgs e)
        {
            LoadGridData();
        }

        private void Receive_Click(object sender, EventArgs e)
        {
            DataTable dt = (DataTable)dh.ExecuteSql("select ST_USESTATUS,nvl(st_maxusecount,0)st_maxusecount,nvl(st_usecount,0)st_usecount from Stencil where st_code='" + SU_DEVCODE.Text + "' and st_statuscode='AUDITED'", "select");
            int WaringCount = int.Parse(dh.GetConfig("WaringCount", "Stencil").ToString());
            int st_maxusecount = 0;
            int st_usecount = 0;
            if (dt.Rows.Count > 0)
            {
                string status = dt.Rows[0]["ST_USESTATUS"].ToString();
                st_maxusecount = int.Parse(dt.Rows[0]["st_maxusecount"].ToString());
                st_usecount = int.Parse(dt.Rows[0]["st_usecount"].ToString());
                if (status == "借出" || status == "报废" || status == "在线")
                {
                    MessageBox.Show("当前钢网" + SU_DEVCODE.Text + "处于" + status + "状态,无法领用");
                    return;
                }
            }
            else
            {
                MessageBox.Show("钢网编号" + SU_DEVCODE.Text + "不存在或者未审核");
                return;
            }
            //使用次数预警
            if (st_maxusecount - st_usecount < WaringCount)
            {
                string close = MessageBox.Show(this.ParentForm, "钢网已使用" + st_usecount + "，距离使用上限还有" + (st_maxusecount - st_usecount) + "次", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question).ToString();
                if (close != "Yes")
                {
                    return;
                }
            }
            sql.Clear();
            sql.Append("insert into StencilUse(su_id,su_stid,su_stcode,su_stockusedate,su_useman,SU_USEMANCODE,su_stverison,SU_STATUS,SU_CLEANNUMS,su_usedate)");
            sql.Append("select StencilUse_seq.nextval,st_id,'" + SU_DEVCODE.Text + "',sysdate,'" + User.UserName + "','" + User.UserCode + "'");
            sql.Append(",st_version,'借出',ST_CLEANNUMS,sysdate from ");
            sql.Append("Stencil where st_code='" + SU_DEVCODE.Text + "'");
            dh.ExecuteSql(sql.ToString(), "insert");
            dh.ExecuteSql("update Stencil set ST_USESTATUS='借出' where st_code='" + SU_DEVCODE.Text + "'", "update");
            MessageBox.Show("领用成功");
            SU_DEVCODE.Text = "";
            Receive.Enabled = false;
            LoadGridData();
        }

        private void Return_Click(object sender, EventArgs e)
        {


                    DataTable dt = (DataTable)dh.ExecuteSql("select ST_USESTATUS,nvl(St_USECOUNT,0)St_USECOUNT from Stencil where st_code='" + SU_DEVCODE1.Text + "' and st_statuscode='AUDITED'", "select");
                    if (dt.Rows.Count > 0)
                    {
                        string status = dt.Rows[0]["ST_USESTATUS"].ToString();
                        if (status == "在线")
                        {
                            MessageBox.Show("当前钢网" + SU_DEVCODE1.Text + "处于在线状态,无法退回");
                            return;
                        }
                        if (status == "在仓")
                        {
                            MessageBox.Show("当前钢网" + SU_DEVCODE1.Text + "未借出,无需归还");
                            return;
                        }
                        if (status == "报废")
                        {
                            MessageBox.Show("当前钢网" + SU_DEVCODE1.Text + "处于" + status + "状态,无法退回");
                            return;
                        }
                    }
                    else
                    {
                        MessageBox.Show("钢网编号" + SU_DEVCODE1.Text + "不存在或者未审核");
                        return;
                    }
                    sql.Clear();
                    sql.Append("update StencilUse set SU_CLEANNUMS = nvl(SU_CLEANNUMS,0)+1,su_returnman='" + User.UserName + "',SU_STOCKBACKDATE=sysdate ,su_backdate=sysdate,");
                    sql.Append(" SU_STATUS='在仓'");
                    sql.Append(",SU_RETURNIFCLEAN='" + (SU_RETURNIFCLEAN.Checked ? "-1" : "0") + "' where su_id=(select max(su_id) from stenciluse where su_stcode='" + SU_DEVCODE1.Text + "' and su_status='借出' and su_stockusedate is not null)");
                    dh.ExecuteSql(sql.ToString(), "update");
                    sql.Clear();
                    sql.Append("update Stencil set st_cleannums=nvl(st_cleannums,0)+1,ST_USESTATUS='在仓'");
                    sql.Append("  ");
                    sql.Append("where st_code='" + SU_DEVCODE1.Text + "'");
                    dh.ExecuteSql(sql.ToString(), "update");
                    MessageBox.Show("钢网" + SU_DEVCODE1.Text + "退回成功！");
                    SU_DEVCODE1.Text = "";
                    ST_ENSIONA.Text = "";
                    ST_ENSIONB.Text = "";
                    ST_ENSIONC.Text = "";
                    ST_ENSIOND.Text = "";
                    ST_ENSIONE.Text = "";
                    Confirm.PerformClick();

        }

        Make_StencilScrapReason form;
        private void Scrap_Click(object sender, EventArgs e)
        {
            DataTable dt = (DataTable)dh.ExecuteSql("select st_usestatus,st_status from stencil where st_code='" + SU_DEVCODE1.Text + "' and st_statuscode='AUDITED'", "select");
            if (dt.Rows.Count > 0)
            {
                if (dt.Rows[0]["st_usestatus"].ToString() == "报废")
                {
                    MessageBox.Show("钢网" + SU_DEVCODE1.Text + "已处于报废状态");
                    return;
                }
                if (dt.Rows[0]["st_usestatus"].ToString() != "借出")
                {
                    MessageBox.Show("报废钢网必须" + SU_DEVCODE1.Text + "处于借出状态");
                    return;
                }
                string closetab_confirm = MessageBox.Show(this.ParentForm, "报废后不可撤销，是否确认报废", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question).ToString();
                if (closetab_confirm != "Yes")
                {
                    return;
                }
                form = new Make_StencilScrapReason();
                BaseUtil.SetFormCenter(form);
                form.Controls["ConfirmScrap"].Click += Make_SMTStencil_Click;
                form.ShowDialog();
            }
            else
            {
                MessageBox.Show("钢网编号" + SU_DEVCODE1.Text + "不存在或者未审核");
            }
        }

        private void Make_SMTStencil_Click(object sender, EventArgs e)
        {
            string Code = "";
            string scrapreason = form.Controls["Reason"].Text;
            if (scrapreason == "")
            {
                MessageBox.Show("报废原因不能为空");
                return;
            }
            sql.Clear();
            sql.Append("update StencilUse set SU_IFSCRAPOLD=-1,SU_STATUS='报废',SU_ENSIONA='" + ST_ENSIONA.Text + "',SU_ENSIONB='" + ST_ENSIONB.Text + "',SU_ENSIONC='" + ST_ENSIONC.Text + "',SU_ENSIOND='" + ST_ENSIOND.Text + "',SU_ENSIONE='" + ST_ENSIONE.Text + "'");
            sql.Append(",SU_RETURNIFCLEAN='" + (SU_RETURNIFCLEAN.Checked ? "-1" : "0") + "' where su_id=(select max(su_id) from stenciluse where su_stcode='" + SU_DEVCODE1.Text + "')");
            dh.ExecuteSql(sql.ToString(), "update");
            sql.Clear();
            sql.Append("update Stencil set ST_SCRAPREASON='" + scrapreason + "',ST_SCRAPMANCODE='" + User.UserCode + "',st_scrapman='" + User.UserName + "',st_scrapdate=sysdate,ST_USESTATUS='报废',ST_ENSIONA='" + ST_ENSIONA.Text + "',ST_ENSIONB='" + ST_ENSIONB.Text + "',");
            sql.Append("ST_ENSIONC='" + ST_ENSIONC.Text + "',ST_ENSIOND='" + ST_ENSIOND.Text + "',ST_ENSIONE='" + ST_ENSIONE.Text + "' ");
            sql.Append("where st_code='" + SU_DEVCODE1.Text + "'");
            dh.ExecuteSql(sql.ToString(), "insert");
            ////推送人员信息
            //string[] emid = dh.GetConfig("sendEmp", "Stencil").ToString().Replace("\n", "#").Split('#');
            //for (int i = 0; i < emid.Length; i++)
            //{
            //    string em_name = dh.getFieldDataByCondition("employee", "em_name", "em_id='" + emid[i] + "'").ToString();
            //   // LogicHandler.SendMessage(emid[i], em_name, "钢网" + SU_DEVCODE1.Text + "已报废" + ",原因" + scrapreason + ",人员" + User.UserName);
            //}
            form.Close();
            SU_DEVCODE1.Text = "";
            ST_ENSIONA.Text = "";
            ST_ENSIONB.Text = "";
            ST_ENSIONC.Text = "";
            ST_ENSIOND.Text = "";
            ST_ENSIONE.Text = "";
            SU_RETURNIFCLEAN.Checked = false;
            Scrap.Enabled = false;
            MessageBox.Show("报废成功！");
        }

        private void Radio_CheckedChanged(object sender, EventArgs e)
        {
            switch ((sender as Control).Name)
            {
                case "RadioReceive":
                    if ((sender as RadioButton).Checked)
                    {
                        SU_DEVCODE.Enabled = true;
                        Receive.Enabled = true;
                        Receive.Enabled = true;
                        SU_DEVCODE1.Enabled = false;
                        ST_ENSIONA.Enabled = false;
                        ST_ENSIONB.Enabled = false;
                        ST_ENSIONC.Enabled = false;
                        ST_ENSIOND.Enabled = false;
                        ST_ENSIONE.Enabled = false;
                        Return.Enabled = false;
                        Scrap.Enabled = false;
                    }
                    break;
                case "RadioReturn":
                    if ((sender as RadioButton).Checked)
                    {
                        SU_DEVCODE1.Enabled = true;
                        ST_ENSIONA.Enabled = true;
                        ST_ENSIONB.Enabled = true;
                        ST_ENSIONC.Enabled = true;
                        ST_ENSIOND.Enabled = true;
                        ST_ENSIONE.Enabled = true;
                        SU_DEVCODE.Enabled = false;
                        Return.Enabled = true;
                        Scrap.Enabled = true;
                    }
                    break;
                default:
                    break;
            }
        }

        //默认范围39-55，如不在范围内则可以报废
        private void ST_ENSION_TextChanged(object sender, EventArgs e)
        {
            double Range = 0;
            List<string> Num = new List<string>();
            Num.Add(ST_ENSIONA.Text);
            Num.Add(ST_ENSIONB.Text);
            Num.Add(ST_ENSIONC.Text);
            Num.Add(ST_ENSIOND.Text);
            Num.Add(ST_ENSIONE.Text);
            int CheckCount = 0;
            int FillCount = 0;
            foreach (string item in Num)
            {
                if (item != "")
                {
                    FillCount = FillCount + 1;
                    if (double.TryParse(item, out Range))
                    {
                        //如果使用过张力范围39-55，使用过30-55
                        if (ifUsed)
                        {
                            if (Range > 30 && Range <= 55)
                            {
                                CheckCount = CheckCount + 1;
                            }
                        }
                        else
                        {
                            if (Range > 30 && Range <= 55)
                            {
                                CheckCount = CheckCount + 1;
                            }
                        }
                    }
                }
            }
            if (FillCount == 5)
            {
                if (CheckCount == 5)
                {
                    Return.Enabled = true;
                    Scrap.Enabled = false;
                }
                else
                {
                    Return.Enabled = false;
                    Scrap.Enabled = true;
                }
            }
        }

        private void SU_DEVCODE_KeyDown(object sender, KeyEventArgs e)
        {
            if (e.KeyCode == Keys.Enter)
            {
                DataTable dt = (DataTable)dh.ExecuteSql("select st_usestatus,st_table from stencil where st_code='" + SU_DEVCODE.Text + "' and st_statuscode='AUDITED'", "select");
                if (dt.Rows.Count == 0)
                {
                    MessageBox.Show("钢网编号" + SU_DEVCODE.Text + "不存在或者未审核");
                }
                if (dt.Rows.Count > 0)
                {
                    Receive.Enabled = true;
                    if (dt.Rows[0]["st_usestatus"].ToString() == "报废")
                    {
                        MessageBox.Show("钢网编号" + SU_DEVCODE.Text + "已报废");
                    }
                }
            }
        }

        private void SU_DEVCODE1_KeyDown(object sender, KeyEventArgs e)
        {
            if (e.KeyCode == Keys.Enter)
            {
                DataTable dt = (DataTable)dh.ExecuteSql("select nvl(st_usecount,0)st_usecount,case when nvl(ST_COMBINENUMBER,1)=0 then 1 else nvl(ST_COMBINENUMBER,1) end from STENCIL where st_code='" + SU_DEVCODE1.Text + "' and st_statuscode='AUDITED'", "select");
                if (dt.Rows.Count == 0)
                {
                    MessageBox.Show("钢网编号" + SU_DEVCODE1.Text + "不存在或者未审核");
                }
                else
                {
                    st_usecount.Text = dt.Rows[0]["st_usecount"].ToString();
                    if (int.Parse(st_usecount.Text) > 0)
                    {
                        ifUsed = true;
                    }
                    else
                    {
                        ifUsed = false;
                    }
                }
            }
        }

        private void ma_code_TextKeyDown(object sender, KeyEventArgs e)
        {
            if (e.KeyCode == Keys.Enter)
            {
                Confirm.PerformClick();
            }
        }
    }
}