using System;
using System.Collections;
using System.Collections.Generic;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using UAS_MES_NEW.CustomControl.DataGrid_View;
using UAS_MES_NEW.CustomControl.TextBoxWithIcon;
using UAS_MES_NEW.DataOperate;
using UAS_MES_NEW.Entity;
using UAS_MES_NEW.PublicMethod;

namespace UAS_MES_NEW.Make
{
    public partial class Make_Repair : Form
    {
        string mb_id = "";
        string mbr_id = "";
        /// <summary>
        /// 存放父节点信息
        /// </summary>
        Dictionary<string, Dictionary<string, string>> BadInf_1 = new Dictionary<string, Dictionary<string, string>>();
        /// <summary>
        /// 存放子节点信息
        /// </summary>
        Dictionary<string, Dictionary<string, string>> BadInf_2 = new Dictionary<string, Dictionary<string, string>>();

        DataHelper dh = null;

        LogStringBuilder sql = new LogStringBuilder();

        List<string> sqls = new List<string>();

        DataTable dt = null;

        AutoSizeFormClass asc = new AutoSizeFormClass();

        string macode;

        string msid = "";

        string ifrework = "";

        string reworkstatus = "";

        string firstsn = "";

        string ms_stepcode = "";

        DataTable Dbfind;

        public Make_Repair()
        {
            InitializeComponent();
        }

        private void Make_Repair_Load(object sender, EventArgs e)
        {
            //为DBFind配置Call和Form的名称
            cr_code.FormName = Name;
            cr_code.TableName = "craft";
            cr_code.SelectField = "cr_name # 工艺名称,cr_code # 工艺编号,cr_prodcode # 物料编号";
            cr_code.SetValueField = new string[] { "cr_code" };
            cr_code.DBTitle = "回流工艺";
            cr_code.DbChange += Cr_code_DbChange;

            cd_stepcode.FormName = Name;
            cd_stepcode.TableName = "craftdetail left join step on st_code=cd_stepcode left join craft on cd_crid=cr_id";
            cd_stepcode.SetValueField = new string[] { "cd_stepcode" };
            cd_stepcode.SelectField = "cd_stepname # 工序名称 ,cd_stepcode # 工序编号,cd_stepno # 执行顺序";
            cd_stepcode.DBTitle = "回流工序";
            cd_stepcode.DbChange += Cd_stepcode_DbChange;

            bd_soncode.FormName = Name;
            bd_soncode.TableName = "bom left join bomdetail on bd_bomid=bo_id left join product on bd_soncode=pr_code";
            bd_soncode.SetValueField = new string[] { "bd_soncode" };
            bd_soncode.SelectField = "bd_soncode # 子件编号,pr_detail # 物料名称,pr_spec # 物料规格,bd_location # 位号";
            bd_soncode.DBTitle = "不良零件";
            bd_soncode.DbChange += Prodcode_DbChange;

            //nrg_name.BringToFront();
            nrg_name.TableName = "(select nrg_name,nrg_code from QUA_NGREASONGROUP left join DATAINPUTRECORD ON NRG_NAME = DIR_COMMENT AND DIR_GROUP = '不良原因组' and DIR_SOURCECODE = '" + User.UserSourceCode + "' ORDER BY NVL(DIR_NUMBER,0) DESC)";
            nrg_name.Field = "nrg_name";
            nrg_name.ValueField = "nrg_code";
            nrg_name.Condition = " 1=1 ORDER BY ROWNUM asc";

            nr_name.TableName = "QUA_NGREASONGROUPDET left join QUA_NGREASONGROUP on nrgd_nrgid=nrg_id left join QUA_NGReason on nrgd_nrcode=nr_code left join DATAINPUTRECORD ON nr_name = DIR_COMMENT AND DIR_GROUP = '不良原因' and  DIR_SOURCECODE = '" + User.UserSourceCode + "' ";
            nr_name.Field = "nr_name";
            nr_name.ValueField = "nr_code";

            mbr_dutyname.TableName = "(select nd_name,nd_code from  ngduty left join DATAINPUTRECORD ON nd_name = DIR_COMMENT  AND DIR_GROUP = '责任别' and DIR_SOURCECODE = '" + User.UserSourceCode + "' ORDER BY NVL(DIR_NUMBER,0) DESC) ";
            mbr_dutyname.Field = "nd_name";
            mbr_dutyname.ValueField = "nd_code";
            mbr_dutyname.Condition = " 1=1 ORDER BY ROWNUM asc";

            so_name.TableName = "(select so_name,so_code from solution left join DATAINPUTRECORD ON so_name = DIR_COMMENT AND DIR_GROUP = '解决方案' and DIR_SOURCECODE = '" + User.UserSourceCode + "' ORDER BY NVL(DIR_NUMBER,0) DESC)";
            so_name.Field = "so_name";
            so_name.ValueField = "so_code";
            so_name.Condition = " 1=1 ORDER BY ROWNUM asc";

            asc.controllInitializeSize(this);
            mbc_component.SendToBack();
            so_name.SendToBack();
            mbl_loc.SendToBack();
            bd_soncode.SendToBack();
            mbp_partdgv.SendToBack();
            mbp_part_label.SendToBack();
            dh = SystemInf.dh;
            GetSNCode.Focus();
        }

        private void Prodcode_DbChange(object sender, EventArgs e)
        {
            Dbfind = bd_soncode.ReturnData;
            BaseUtil.SetFormValue(this.Controls, Dbfind);
            if (bd_soncode.Text != "")
            {
                if (mbr_id != "")
                {
                    if (!dh.CheckExist("makebadrspart", "mbp_sncode='" + GetSNCode.Text + "' and mbp_part='" + bd_soncode.Text + "' and mbp_badcode='" + bc_code.Text + "'"))
                    {
                        sql.Clear();
                        sql.Append("insert into makebadrspart(mbp_id,mbp_mbrid,mbp_part,mbp_badcode,");
                        sql.Append("mbp_brcode,mbp_sncode,mbp_makecode,mbp_indate,mbp_inman)");
                        sql.Append("select makebadrspart_seq.nextval," + mbr_id + ",'" + bd_soncode.Text + "',");
                        sql.Append("'" + bc_code.Text + "','" + nr_code.Text + "','" + GetSNCode.Text + "','" + macode + "',");
                        sql.Append("sysdate,'" + User.UserCode + "' from dual");
                        dh.ExecuteSql(sql.GetString(), "insert");
                        DataTable dt = (DataTable)dh.ExecuteSql("select mbp_id,mbp_part from makebadrspart where mbp_mbrid=" + mbr_id, "select");
                        BaseUtil.FillDgvWithDataTable(mbp_partdgv, dt);
                    }
                }
                else OperatResult.AppendText(">>请先选择不良原因\n", Color.Red);
            }
            else OperatResult.AppendText(">>不良零件不能为空\n", Color.Red);
        }

        private void Cd_stepcode_DbChange(object sender, EventArgs e)
        {
            Dbfind = cd_stepcode.ReturnData;
            BaseUtil.SetFormValue(this.Controls, Dbfind);
        }

        private void Cr_code_DbChange(object sender, EventArgs e)
        {
            Dbfind = cr_code.ReturnData;
            BaseUtil.SetFormValue(this.Controls, Dbfind);
        }

        private void GetSNCode_KeyDown(object sender, KeyEventArgs e)
        {
            if (e.KeyCode == Keys.Enter)
            {
                if (GetSNCode.Text == "")
                {
                    OperatResult.AppendText(">>序列号不允许为空\n", Color.Red);
                    BaseUtil.CleanForm(this);
                    BadCodeTree.Nodes.Clear();
                    return;
                }
                sql.Clear();
                sql.Append("select ms_status,ms_outboxcode,ms_paststep,ms_reworkstatus,nvl(ms_ifrework,0)ms_ifrework from makeserial left join make ");
                sql.Append("on ms_makecode=ma_code where ms_sncode = '" + GetSNCode.Text + "' order by ms_id desc");
                dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
                string ms_paststep = "";
                if (dt.Rows.Count > 0)
                {
                    string ms_status = dt.Rows[0]["ms_status"].ToString();
                    ms_paststep = dt.Rows[0]["ms_paststep"].ToString();
                    ifrework = dt.Rows[0]["ms_ifrework"].ToString();
                    reworkstatus = dt.Rows[0]["ms_reworkstatus"].ToString();
                    if (dt.Rows[0]["ms_outboxcode"].ToString() != "")
                    {
                        OperatResult.AppendText(">>序列号:" + GetSNCode.Text + "已装箱，请先进行拆箱\n", Color.Red);
                        BaseUtil.CleanForm(this);
                        BadCodeTree.Nodes.Clear();
                        return;
                    }
                    //如果不是返修序列号执行原来的步骤
                    if (ifrework == "0")
                    {
                        if (ms_status == "4")
                        {
                            OperatResult.AppendText(">>序列号:" + GetSNCode.Text + "已处于报废状态\n", Color.Red);
                            BaseUtil.CleanForm(this);
                            BadCodeTree.Nodes.Clear();
                            return;
                        }
                        if (ms_status != "3")
                        {
                            OperatResult.AppendText(">>序列号:" + GetSNCode.Text + "不处于维修状态\n", Color.Red);
                            BaseUtil.CleanForm(this);
                            BadCodeTree.Nodes.Clear();
                            return;
                        }
                    }
                    else
                    {
                        if (reworkstatus == "4")
                        {
                            OperatResult.AppendText(">>序列号:" + GetSNCode.Text + "已处于报废状态\n", Color.Red);
                            BaseUtil.CleanForm(this);
                            BadCodeTree.Nodes.Clear();
                            return;
                        }
                        if (reworkstatus != "0" && reworkstatus != "3")
                        {
                            OperatResult.AppendText(">>序列号:" + GetSNCode.Text + "不处于维修状态\n", Color.Red);
                            BaseUtil.CleanForm(this);
                            BadCodeTree.Nodes.Clear();
                            return;
                        }
                    }
                }
                else
                {
                    OperatResult.AppendText(">>序列号:" + GetSNCode.Text + "不存在\n", Color.Red);
                    BaseUtil.CleanForm(this);
                    BadCodeTree.Nodes.Clear();
                    return;
                }
                //dt = (DataTable)dh.ExecuteSql("select mb_stepcode from makebad where mb_sncode='" + GetSNCode.Text + "' and mb_status=0 order by mb_id desc", "select");
                ////打不良的资源和当前资源相等可以快速维修，无须登录维修资源
                //bool QuickRepair = false;
                //if (dt.Rows.Count > 0)
                //{
                //    if (dt.Rows[0]["mb_stepcode"].ToString() == User.CurrentStepCode)
                //    {
                //        QuickRepair = true;
                //    }
                //}
                string ErrorMessage = "";
                //验证工序是否正确
                if (LogicHandler.CheckStepAttribute(Tag.ToString(), User.UserSourceCode, out ErrorMessage))
                {
                    BadInf_1.Clear();
                    string oStatus = "";
                    if (LogicHandler.GetMakeInfo(GetSNCode.Text, out macode, out oStatus, out ErrorMessage))
                    {
                        //验证makeserial或者ms_firstsn表序列号是否存在
                        sql.Clear();
                        sql.Append("select max(ms_id) ms_id,ms_makecode,ma_craftcode,ms_stepcode,ms_firstsn,ms_prodcode,ms_sncode,ma_bomversion,pr_detail,ms_craftcode,ms_checkno,ms_ifrework,ms_reworkcheckno ");
                        sql.Append("from makeserial left join make on ms_makecode=ma_code left join product on pr_code=ms_prodcode where ms_makecode ='" + macode + "' and ms_sncode in(");
                        sql.Append("select '" + GetSNCode.Text + "' from dual union select firstsn from makesnrelation where ");
                        sql.Append("sn='" + GetSNCode.Text + "') group by ms_makecode,ms_stepcode,ms_prodcode,ma_craftcode,ms_sncode,ma_bomversion,pr_detail,ms_firstsn,ms_craftcode,ms_checkno,ms_ifrework,ms_reworkcheckno");
                        dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
                        if (dt.Rows.Count > 0)
                        {
                            msid = dt.Rows[0]["ms_id"].ToString();
                            ms_stepcode = dt.Rows[0]["ms_stepcode"].ToString();
                            BaseUtil.SetFormValue(this.Controls, dt);
                            //判断是否当前工单途程的上料记录
                            firstsn = dt.Rows[0]["ms_firstsn"].ToString();
                            string ma_bomversion = dt.Rows[0]["ma_bomversion"].ToString();
                            string cdstepcode = "";
                            //sql.Clear();
                            //sql.Append("select cm_craftcode,cm_stepcode,cm_soncode,min(cm_indate)cm_indate,sum(case when cm_status=-1 ");
                            //sql.Append("then 0 else 1 end)qty from craftmaterial left join product on pr_code=cm_soncode where(cm_sncode ");
                            //sql.Append("in (select sn from makesnrelation where firstsn='" + firstsn + "' union select '" + firstsn + "' from dual)) ");
                            //sql.Append("and cm_craftcode='" + cr_code.Text + "'and nvl(cm_lastdeco,0)<>0 group by cm_craftcode,cm_stepcode,cm_soncode having ");
                            //sql.Append("sum(case when cm_status=-1 then 0 else 1 end)=0 order by cm_indate");
                            sql.Clear();
                            sql.Append("select sp_stepcode cm_stepcode,sp_craftcode cm_craftcode from stepproduct left join product on pr_code=sp_fsoncode where sp_bomversion='" + ma_bomversion + "' and ");
                            sql.Append("sp_craftcode='" + cr_code.Text + "' And sp_mothercode ='" + ms_prodcode.Text + "' and sp_tracekind=1 ");
                            //sql.Append("sp_craftcode=v_v_mscraftcode and sp_stepcode='' And sp_mothercode ='"+ms_prodcode.Text+"' and sp_tracekind=1");
                            sql.Append("and not exists(select 1 from craftmaterial where cm_sncode in (select '" + firstsn + "' from dual union ");
                            sql.Append("select sn from makesnrelation where firstsn='" + firstsn + "') and cm_makecode='" + macode + "' and ");
                            sql.Append("cm_fsoncode=sp_fsoncode and cm_status=0) and instr((select ms_paststep from makeserial where ms_firstsn='" + firstsn + "'),sp_stepcode)>0 order by SP_DETNO asc");
                            dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
                            if (dt.Rows.Count > 0)
                            {
                                cdstepcode = dt.Rows[0]["cm_stepcode"].ToString();
                                //如果本工序包含老化则默认选择本工序，否则选择上料的后一道工序
                                //if (dh.getFieldDataByCondition("craft left join craftdetail on cr_id=cd_crid", "nvl(cd_ifburnin,0)", "cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' and cd_stepcode='" + dt.Rows[0]["cm_stepcode"].ToString() + "'").ToString() != "0")
                                //    cdstepcode = dt.Rows[0]["cm_stepcode"].ToString();
                                //else
                                //{
                                //string nextstep = LogicHandler.GetNextStep(dt.Rows[0]["cm_craftcode"].ToString(), dt.Rows[0]["cm_stepcode"].ToString(), ms_prodcode.Text);
                                //    if (ms_paststep.Contains(nextstep))
                                //    {
                                //        cdstepcode = nextstep;
                                //    }
                                //    else
                                //    {
                                //        cdstepcode = dt.Rows[0]["cm_stepcode"].ToString();
                                //    }
                                //}
                            }
                            else
                            {
                                sql.Clear();
                                sql.Append("select cm_craftcode,cm_stepcode,cm_soncode,min(cm_indate)cm_indate,sum(case when cm_status=-1 ");
                                sql.Append("then 0 else 1 end)qty from craftmaterial left join product on pr_code=cm_soncode where(cm_sncode ");
                                sql.Append("in (select sn from makesnrelation where firstsn='" + firstsn + "'  union select '" + firstsn + "' from dual)) ");
                                sql.Append("and cm_craftcode='" + cr_code.Text + "' group by cm_craftcode,cm_stepcode,cm_soncode having ");
                                sql.Append("sum(case when cm_status=-1 then 0 else 1 end)=0 order by cm_indate");
                                dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
                                if (dt.Rows.Count > 0)
                                {
                                    cdstepcode = dt.Rows[0]["cm_stepcode"].ToString();
                                }
                            }
                            if (cdstepcode == "")
                            {
                                //序号小于等于当前不良的序号
                                string currentdetno = dh.getFieldDataByCondition("craft left join craftdetail on cr_id=cd_crid", "cd_detno", "cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' and cd_stepcode='" + ms_stepcode + "'").ToString();
                                sql.Clear();
                                sql.Append("select cd_stepcode from craft left join craftdetail on cr_id =cd_crid where ");
                                sql.Append("cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' and  ");
                                sql.Append("nvl(cd_ifspc,0)<>0 and cd_detno <='" + currentdetno + "' order by cd_detno desc");
                                dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
                                if (dt.Rows.Count > 0)
                                {
                                    cdstepcode = dt.Rows[0][0].ToString();
                                }
                            }
                            //如果ms_stepcode和扣料工序均没有查到返修的工序
                            if (cdstepcode == "")
                            {
                                string flowback = dh.getFieldDataByCondition("craftdetail left JOIN craft on cr_id = cd_crid", "cd_stepcode", "cr_code=  '" + cr_code.Text + "' and cr_prodcode = '" + ms_prodcode.Text + "' and nvl(cd_ifflowback,0)=-1").ToString();
                                if (flowback != "")
                                {
                                    cdstepcode = flowback;
                                }
                                else
                                {
                                    cdstepcode = ms_stepcode;
                                }
                            }
                            cd_stepcode.Text = cdstepcode;
                            //if (dh.getFieldDataByCondition("craftdetail left JOIN craft on cr_id = cd_crid", "nvl(cd_ifinput,0)cd_ifinput", "cr_code=  '" + cr_code.Text + "' and cr_prodcode = '" + ms_prodcode.Text + "' and cd_stepcode = '" + cd_stepcode.Text + "'").ToString() == "-1")
                            //    cd_stepcode.Enabled = false;
                            //else
                            //    cd_stepcode.Enabled = true;
                            LoadBadInfTree(sender, e);
                        }
                        else OperatResult.AppendText(">>" + ErrorMessage + "\n", Color.Red);
                    }
                    else OperatResult.AppendText(">>" + ErrorMessage + "\n", Color.Red);
                }
                else OperatResult.AppendText(">>" + ErrorMessage + "\n", Color.Red);
            }
        }

        private void Make_Repair_SizeChanged(object sender, EventArgs e)
        {
            mbc_component.BringToFront();
            so_name.BringToFront();
            mbl_loc.BringToFront();
            bd_soncode.BringToFront();
            mbp_partdgv.BringToFront();
            mbp_part_label.BringToFront();
            asc.controlAutoSize(this);
            mbc_component.SendToBack();
            so_name.SendToBack();
            mbl_loc.SendToBack();
            bd_soncode.SendToBack();
            mbp_partdgv.SendToBack();
            mbp_part_label.SendToBack();
        }

        private void BadCodeTree_NodeMouseClick(object sender, TreeNodeMouseClickEventArgs e)
        {
            if (e.Node.Level == 0)
            {
                mb_id = e.Node.Tag.ToString();
                BaseUtil.CleanControlsText(bc_name, bc_code, bg_name, bg_code, mb_badremark, nrg_name, nrg_code, nr_name, nr_code, so_name, so_code, mbr_dutyname, mbr_dutycode, mbc_component);
                mbl_locdgv.DataSource = null;
                mbp_partdgv.DataSource = null;
                bc_name.Text = BadInf_1[mb_id]["bc_name"];
                bc_code.Text = BadInf_1[mb_id]["mb_badcode"];
                bg_name.Text = BadInf_1[mb_id]["bg_name"];
                bg_code.Text = BadInf_1[mb_id]["mb_bgcode"];
                mb_badremark.Text = BadInf_1[mb_id]["mb_badremark"];
                mbr_id = "";
                SaveRepairInf.Enabled = true;
            }
            if (e.Node.Level == 1)
            {
                //展示父节点信息
                mb_id = e.Node.Parent.Tag.ToString();
                bc_code.Text = BadInf_1[mb_id]["mb_badcode"];
                bc_name.Text = BadInf_1[mb_id]["bc_name"];
                bg_code.Text = BadInf_1[mb_id]["mb_bgcode"];
                bg_name.Text = BadInf_1[mb_id]["bg_name"];
                //展示子节点信息
                mbr_id = e.Node.Tag.ToString();
                nrg_code.Text = BadInf_2[mbr_id]["nrg_code"];
                nrg_name.Text = BadInf_2[mbr_id]["nrg_name"];
                nr_code.Text = BadInf_2[mbr_id]["nr_code"];
                nr_name.Text = BadInf_2[mbr_id]["nr_name"];
                so_code.Text = BadInf_2[mbr_id]["so_code"];
                so_name.Text = BadInf_2[mbr_id]["so_name"];
                mbr_dutycode.Text = BadInf_2[mbr_id]["mbr_dutycode"];
                mbr_dutyname.Text = BadInf_2[mbr_id]["mbr_dutyname"];
                mbc_component.Text = dh.getFieldDataByCondition("makebadrscom", "mbc_component", "mbc_mbrid=" + mbr_id).ToString();
                //加载两个Grid的数据源
                DataTable dt = (DataTable)dh.ExecuteSql("select mbp_id,mbp_part from makebadrspart where mbp_mbrid=" + mbr_id, "select");
                BaseUtil.FillDgvWithDataTable(mbp_partdgv, dt);
                dt = (DataTable)dh.ExecuteSql("select mbl_id,mbl_loc from makebadrsloc where mbl_mbrid=" + mbr_id, "select");
                BaseUtil.FillDgvWithDataTable(mbl_locdgv, dt);
                SaveRepairInf.Enabled = false;
            }
        }

        private void LoadBadInfTree(object sender, EventArgs e)
        {
            BadCodeTree.Nodes.Clear();
            sql.Clear();
            //不是返工工单时的取当前工单
            sql.Append("select mb_id,mb_sncode,mb_badcode,mb_bgcode,nvl(bc_name,mb_badcode) bc_name,nvl(bg_name,mb_bgcode) bg_name,");
            sql.Append("mb_badremark from makebad left join badcode on bc_code=mb_badcode left join badgroup ");
            sql.Append("on bg_code=mb_bgcode where (mb_sncode='" + (GetSNCode.Text == "" ? ms_sncode.Text : GetSNCode.Text) + "' or mb_mscode='" + (GetSNCode.Text == "" ? ms_sncode.Text : GetSNCode.Text) + "' ) and mb_makecode='" + macode + "' and mb_status=0");
            dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
            if (dt.Rows.Count == 0)
            {
                sql.Clear();
                sql.Append("select mb_id,mb_sncode,mb_badcode,mb_bgcode,nvl(bc_name,mb_badcode) bc_name,nvl(bg_name,mb_bgcode) bg_name, ");
                sql.Append("mb_badremark from makebad left join badcode on bc_code=mb_badcode left join badgroup on bg_code=mb_bgcode  ");
                sql.Append("left join make on ma_code=mb_makecode where mb_sncode='" + (GetSNCode.Text == "" ? ms_sncode.Text : GetSNCode.Text) + "' and mb_makecode<>'" + macode + "' and mb_status=0");
                dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
            }
            for (int i = 0; i < dt.Rows.Count; i++)
            {
                //添加根节点
                TreeNode tnode_0 = new TreeNode();
                string bg_name = dt.Rows[i]["bg_name"].ToString();
                string bc_name = dt.Rows[i]["bc_name"].ToString();
                string mb_badcode = dt.Rows[i]["mb_badcode"].ToString();
                string mb_bgcode = dt.Rows[i]["mb_bgcode"].ToString();
                tnode_0.Text = (bg_name == "" ? mb_bgcode : bg_name) + ":" + (bc_name == "" ? mb_bgcode : bc_name);
                tnode_0.Name = dt.Rows[i]["mb_bgcode"].ToString();
                //作为Dictionary的主标识
                string mb_id = dt.Rows[i]["mb_id"].ToString();
                tnode_0.Tag = mb_id;
                Dictionary<string, string> dic = new Dictionary<string, string>();
                dic.Add("mb_id", mb_id);
                dic.Add("mb_sncode", dt.Rows[i]["mb_sncode"].ToString());
                dic.Add("mb_badcode", dt.Rows[i]["mb_badcode"].ToString());
                dic.Add("mb_bgcode", dt.Rows[i]["mb_bgcode"].ToString());
                dic.Add("bc_name", dt.Rows[i]["bc_name"].ToString());
                dic.Add("bg_name", dt.Rows[i]["bg_name"].ToString());
                dic.Add("mb_badremark", dt.Rows[i]["mb_badremark"].ToString());
                if (!BadInf_1.ContainsKey(tnode_0.Tag.ToString()))
                    BadInf_1.Add(tnode_0.Tag.ToString(), dic);
                BadCodeTree.Nodes.Add(tnode_0);
                BadCodeTree.SelectedNode = BadCodeTree.Nodes[0];

                //添加子节点
                sql.Clear();
                sql.Append("select mbr_id,mbr_brcode,mbr_brgcode,mbr_solutioncode,so_code,so_name,mbr_dutycode,mbr_dutyname,nd_name,nrg_name");
                sql.Append(",nr_name,nr_code,nrg_code from makebadreason left join QUA_NGReason on nr_code=mbr_brcode left join ");
                sql.Append("QUA_NGREASONGROUPdet on nrgd_nrcode=nr_code left join QUA_NGREASONGROUP on nrg_id=nrgd_nrgid and ");
                sql.Append("mbr_brgcode=nrg_code left join solution on so_code=mbr_solutioncode left join ngduty on nd_code=mbr_dutycode ");
                sql.Append("where mbr_mbid=" + mb_id);
                DataTable dt1 = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
                for (int j = 0; j < dt1.Rows.Count; j++)
                {
                    TreeNode tnode_1 = new TreeNode();
                    //存放子节点的信息
                    Dictionary<string, string> dic1 = new Dictionary<string, string>();
                    string mbr_id = dt1.Rows[j]["mbr_id"].ToString();
                    tnode_1.Tag = mbr_id;
                    dic1.Add("mbr_id", mbr_id);
                    dic1.Add("mbr_brcode", dt1.Rows[j]["mbr_id"].ToString());
                    dic1.Add("mbr_brgcode", dt1.Rows[j]["mbr_brcode"].ToString());
                    dic1.Add("mbr_solutioncode", dt1.Rows[j]["mbr_solutioncode"].ToString());
                    dic1.Add("mbr_dutycode", dt1.Rows[j]["mbr_dutycode"].ToString());
                    dic1.Add("mbr_dutyname", dt1.Rows[j]["mbr_dutyname"].ToString());
                    dic1.Add("nd_name", dt1.Rows[j]["nd_name"].ToString());
                    dic1.Add("so_name", dt1.Rows[j]["so_name"].ToString());
                    dic1.Add("so_code", dt1.Rows[j]["so_code"].ToString());
                    dic1.Add("nrg_name", dt1.Rows[j]["nrg_name"].ToString());
                    dic1.Add("nrg_code", dt1.Rows[j]["nrg_code"].ToString());
                    dic1.Add("nr_name", dt1.Rows[j]["nr_name"].ToString());
                    dic1.Add("nr_code", dt1.Rows[j]["nr_code"].ToString());
                    tnode_1.Text = dt1.Rows[j]["nr_name"].ToString();
                    if (!BadInf_2.ContainsKey(mbr_id))
                        BadInf_2.Add(mbr_id, dic1);
                    tnode_0.Nodes.Add(tnode_1);
                }
            }
            try
            {
                if (bg_code.Text != "")
                    BadCodeTree.Nodes[bg_code.Text].Expand();
            }
            catch (Exception) { }
        }

        private void RefreshTreeView_Click(object sender, EventArgs e)
        {
            LoadBadInfTree(sender, e);
        }

        private void RepairComplete_Click(object sender, EventArgs e)
        {
            if (ms_sncode.Text == "")
            {
                OperatResult.AppendText(">>序列号不允许为空\n", Color.Red);
                return;
            }
            if (ifrework != "0" && reworkstatus == "0")
            {
                if (dh.getRowCount("Makebad", "mb_sncode='" + ms_sncode.Text + "' and mb_makecode='" + ms_makecode.Text + "' and mb_status=0") == 0)
                {
                    OperatResult.AppendText(">>维修必须维护不良代码\n", Color.Red);
                    return;
                }
            }
            //判断是否所有的不良信息都有维护不良原因
            DataTable dt = (DataTable)dh.ExecuteSql("select mb_id,bc_name,mbr_mbid from makebad left join makebadreason on mbr_mbid=mb_id left join badcode on mb_badcode=bc_code where mb_sncode='" + ms_sncode.Text + "'  and mb_makecode='" + ms_makecode.Text + "' and mb_status=0", "select");
            string ErrorMessage = "";
            for (int i = 0; i < dt.Rows.Count; i++)
            {
                if (dt.Rows[i]["mb_id"].ToString() != dt.Rows[i]["mbr_mbid"].ToString())
                    ErrorMessage += "【" + dt.Rows[i]["bc_name"].ToString() + "】";
            }
            if (ErrorMessage != "")
            {
                OperatResult.AppendText(">>" + ErrorMessage + "未维护不良原因\n", Color.Red);
                return;
            }
            //如果岗位资源对应工序的版面不为空的时候
            if (dh.getFieldDataByCondition("makeserial left join step on ms_stepcode=st_code", "st_table", "ms_id='" + msid + "'").ToString() != "")
            {
                if (!dh.CheckExist("makebadrsloc", "mbl_mbrid='" + mbr_id + "' and mbl_makecode='" + ms_makecode.Text + "' and mbl_sncode='" + GetSNCode.Text + "' "))
                {
                    OperatResult.AppendText(">>工序存在版面必须维护不良位置\n", Color.Red);
                    return;
                }
            }
            //查询拆解的物料
            sql.Clear();
            sql.Append("select distinct cm_soncode from craftmaterial where cm_sncode in (select '" + firstsn + "' from dual union ");
            sql.Append("select sn from makesnrelation where firstsn='" + firstsn + "') and cm_craftcode<>'" + cr_code.Text + "' and cm_makecode<>'" + ms_makecode.Text + "' and cm_status=-1 ");
            dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
            //如果含有序列号物料有被拆解过
            if (dt.Rows.Count > 0)
            {
                string soncode = "";
                for (int i = 0; i < dt.Rows.Count; i++)
                {
                    soncode += "'" + dt.Rows[i][0].ToString() + "',";
                }
                //查询对应的上料记录
                sql.Clear();
                sql.Append("select cm_soncode from craftmaterial where cm_sncode in (select '" + firstsn + "' from dual union  select sn from ");
                sql.Append(" makesnrelation where firstsn='" + firstsn + "') and cm_status=0 and cm_soncode in (" + soncode.Substring(0, soncode.Length - 1) + ")");
                DataTable LoadSoncode = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
                //查询的结果不相等表示未完成上料
                if (dt.Rows.Count != LoadSoncode.Rows.Count)
                {
                    for (int i = 0; i < LoadSoncode.Rows.Count; i++)
                    {
                        if (soncode.Contains(LoadSoncode.Rows[i][0].ToString()))
                        {
                            soncode = soncode.Replace(LoadSoncode.Rows[i][0].ToString(), "");
                        }
                    }
                    OperatResult.AppendText(">>" + soncode.Replace("'", "") + "物料尚未备料，不允许回流\n", Color.Red);
                    return;
                }
            }
            dt = (DataTable)dh.ExecuteSql("select cr_id from craft where cr_statuscode='AUDITED' and cr_code='" + cr_code.Text + "'", "select");
            if (dt.Rows.Count == 0)
                OperatResult.AppendText(">>回流工序不存在\n", Color.Red);
            else
            {
                string cr_id = dt.Rows[0]["cr_id"].ToString();
                dt = (DataTable)dh.ExecuteSql("select cd_ifinput from craftdetail left join step on st_code=cd_stepcode where cd_crid='" + cr_id + "' and cd_stepcode='" + cd_stepcode.Text + "' and st_statuscode='AUDITED'", "select");
                if (dt.Rows.Count == 0)
                    OperatResult.AppendText(">>回流工序不在回流工艺中\n", Color.Red);
                else
                {
                    dt = dh.getFieldsDataByCondition("makeserial", new string[] { "nvl(ms_ifrework,0) ms_ifrework", "ms_paststep" }, "ms_sncode='" + ms_sncode.Text + "' and ms_makecode='" + macode + "'");
                    List<string> SQLS = new List<string>();
                    if (dt.Rows.Count > 0)
                    {
                        string ms_ifrework = dt.Rows[0]["ms_ifrework"].ToString();
                        string ms_paststep = dt.Rows[0]["ms_paststep"].ToString();
                        //如果回流的执行过的工序为空
                        if (!ms_paststep.Contains(cd_stepcode.Text) && ms_paststep != "")
                        {
                            OperatResult.AppendText(">>不允许回流到未执行的工序\n", Color.Red);
                            return;
                        }
                        if (ms_ifrework == "0")
                            SQLS.Add("update makeserial set ms_checkno='',ms_paststep = ms_paststep || case when instr(','||ms_paststep||',','" + User.CurrentStepCode + "')=0 then ','||'" + User.CurrentStepCode + "' end , ms_nextstepcode ='" + cd_stepcode.Text + "',ms_craftcode='" + cr_code.Text + "',ms_stepcode='" + User.CurrentStepCode + "',ms_status=1 where ms_id='" + msid + "'");
                        else
                            SQLS.Add("update makeserial set ms_checkno='',ms_paststep = ms_paststep || case when instr(','||ms_paststep||',','" + User.CurrentStepCode + "')=0 then ','||'" + User.CurrentStepCode + "' end , ms_nextstepcode ='" + cd_stepcode.Text + "',ms_craftcode='" + cr_code.Text + "',ms_stepcode='" + User.CurrentStepCode + "',ms_reworkstatus=1 where ms_id='" + msid + "'");
                    }
                    SQLS.Add("update makebad set mb_status=-1 where (mb_sncode='" + ms_sncode.Text + "' or mb_mscode='" + ms_sncode.Text + "') and mb_makecode='" + ms_makecode.Text + "'");
                    //取消最近拆解部件
                    SQLS.Add("update craftmaterial set cm_lastdeco=0 where cm_sncode='" + ms_sncode.Text + "' and cm_makecode='" + ms_makecode.Text + "' and nvl(cm_lastdeco,0)<>0");
                    // SQLS.Add("update MakeBadCount set mbc_status=-1 where mbc_sncode='" + ms_sncode.Text + "'");
                    dh.ExecuteSQLTran(SQLS.ToArray());
                    LogicHandler.InsertMakeProcess(ms_sncode.Text, ms_makecode.Text, User.UserSourceCode, "回流工序", "完成维修回流", User.UserCode);
                    LogicHandler.DoCommandLog(Tag.ToString(), User.UserCode, macode, User.UserLineCode, User.UserSourceCode, "回流工序", "完成维修回流", ms_sncode.Text, ms_checkno.Text);
                    OperatResult.AppendText(">>序列号" + ms_sncode.Text + "回流成功\n", Color.Green);
                    cd_stepcode.Enabled = true;
                    BaseUtil.CleanForm(this);
                    BadCodeTree.Nodes.Clear();
                    GetSNCode.Clear();
                    GetSNCode.Focus();
                }
            }
        }

        private void Scrap_Click(object sender, EventArgs e)
        {
            if (ms_sncode.Text != "")
            {
                //判断是否有无法维修的记录
                int ScrapNum = int.Parse(dh.getFieldDataByCondition("makebadreason left join makebad on mb_id=mbr_mbid", "count(0) cn", "mb_sncode='" + ms_sncode.Text + "' and mb_status=0").ToString());
                if (ScrapNum == 0)
                    OperatResult.AppendText(">>" + ms_sncode.Text + "报废必须维护不良原因\n", Color.Red);
                else
                {
                    string confirm = MessageBox.Show(this.ParentForm, "此操作不可撤销，是否确认报废", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Asterisk).ToString();
                    if (confirm == "Yes")
                    {
                        DataTable dt = dh.getFieldsDataByCondition("makeserial", new string[] { "nvl(ms_ifrework,0)ms_ifrework", "ms_reworkcode" }, "ms_sncode='" + ms_sncode.Text + "' and ms_makecode='" + macode + "'");
                        if (dt.Rows.Count > 0)
                        {
                            string ms_ifrework = dt.Rows[0]["ms_ifrework"].ToString();
                            string reworkcode = dt.Rows[0]["ms_reworkcode"].ToString();
                            if (ms_ifrework == "0")
                            {
                                dh.UpdateByCondition("makeserial", "ms_paststep = ms_paststep ||'," + User.CurrentStepCode + "',ms_status=4,ms_nextstepcode='',ms_stepcode='" + User.CurrentStepCode + "'", "ms_sncode='" + ms_sncode.Text + "' and ms_makecode='" + macode + "'");
                            }
                            else
                            {
                                sqls.Clear();
                                sqls.Add("update makeserial set ms_paststep = ms_paststep ||'," + User.CurrentStepCode + "',ms_status=4,ms_reworkstatus= 4,ms_nextstepcode='',ms_stepcode='" + User.CurrentStepCode + "' where ms_sncode='" + ms_sncode.Text + "' and ms_makecode='" + macode + "'");
                                sqls.Add("update oqcbatch set ob_nowcheckqty=ob_nowcheckqty-1 where ob_checkno='" + ms_reworkcheckno.Text + "'");
                                sqls.Add("delete from oqcbatchdetail where obd_sncode='" + ms_sncode.Text + "' and obd_checkno='" + ms_reworkcheckno.Text + "'");
                                sqls.Add("update ReworkDetail set rd_rwstatus='报废' where rd_reid=(select re_id from rework where re_code='" + reworkcode + "') and rd_sncode='" + reworkcode + "'");
                                dh.ExecuteSQLTran(sqls.ToArray());
                            }
                        }
                        dh.UpdateByCondition("makecraftdetail", "mcd_inqty=mcd_inqty-1,mcd_outqty=mcd_outqty-1", "mcd_macode='" + ms_makecode.Text + "' and mcd_stepcode='" + ms_stepcode + "'");
                        dh.UpdateByCondition("make", "MA_NGMADEQTY=nvl(MA_NGMADEQTY,0)+1", "ma_code='" + macode + "'");
                        LogicHandler.InsertMakeProcess(ms_sncode.Text, ms_makecode.Text, User.UserSourceCode, "报废", "序列号报废", User.UserCode);
                        LogicHandler.DoCommandLog(Tag.ToString(), User.UserCode, macode, User.UserLineCode, User.UserSourceCode, "报废", "序列号报废", ms_sncode.Text, ms_checkno.Text);
                        OperatResult.AppendText(">>报废成功\n", Color.Green);
                        GetSNCode.Clear();
                        BaseUtil.CleanForm(this);
                        BadCodeTree.Nodes.Clear();
                    }
                }
            }
            else OperatResult.AppendText(">>序列号不允许为空\n", Color.Red);
        }

        private void NewBadCode_Click(object sender, EventArgs e)
        {
            if (GetSNCode.Text == "" || macode == null || macode == "")
            {
                OperatResult.AppendText(">>序列号和工单号不允许为空\n", Color.Red);
            }
            else
            {
                Make_NewBadCode badcode = new Make_NewBadCode(GetSNCode.Text, macode);
                badcode.FormClosed += LoadBadInfTree;
                BaseUtil.SetFormCenter(badcode);
                badcode.ShowDialog();
            }
        }

        private void NewRepairInf_Click(object sender, EventArgs e)
        {
            if (bg_name.Text == "" && bc_name.Text == "")
            {
                OperatResult.AppendText(">>不良代码组和不良代码不能为空\n", Color.Red);
            }
            else
            {
                Make_NewMatainInf mataininf = new Make_NewMatainInf(bg_name.Text, bg_code.Text, bc_name.Text, bc_code.Text, GetSNCode.Text, msid, mb_id);
                mataininf.FormClosed += LoadBadInfTree;
                BaseUtil.SetFormCenter(mataininf);
                mataininf.ShowDialog();
            }
        }

        private void SaveRepairInf_Click(object sender, EventArgs e)
        {
            string ErrorMessage = "";
            if (bg_name.Text == "" || bc_name.Text == "")
            {
                OperatResult.AppendText(">>不良代码组和不良代码不能为空\n", Color.Red);
                return;
            }
            if (nrg_name.Text == "")
                ErrorMessage += " 不良原因组 ";
            if (nr_name.Text == "")
                ErrorMessage += " 不良原因 ";
            if (mbr_dutyname.Text == "")
                ErrorMessage += " 责任别 ";
            if (mbr_dutyname.Text == "物料问题" && mbc_component.Text == "")
                ErrorMessage += "责任别为物料问题时必须选择不良零件";
            if (ErrorMessage != "")
            {
                ErrorMessage += "不能为空";
                OperatResult.AppendText(">>" + ErrorMessage + "\n", Color.Red);
                return;
            }
            string mbr_id = dh.GetSEQ("makebadreason_seq");
            //存在不良组件进行提示
            if (dh.CheckExist("makebadreason left join makebad on mbr_mbid=mb_id and mbr_sncode=mb_sncode", "mbr_badcode='" + bc_code.Text + "' and mbr_sncode='" + ms_sncode.Text + "' and mbr_brcode='" + nr_code.Text + "' and mb_status=0"))
            {
                OperatResult.AppendText(">>不良代码【" + bc_name.Text + "】已存在不良原因【" + nr_name.Text + "】\n", Color.Red);
                return;
            }
            if (!dh.CheckExist("QUA_NGREASONGROUP", "nrg_name='" + nrg_name.Text + "'"))
            {
                OperatResult.AppendText(">>不良原因组不存在\n", Color.Red);
                return;
            }
            if (!dh.CheckExist("QUA_NGReason", "nr_name='" + nr_name.Text + "'"))
            {
                OperatResult.AppendText(">>不良原因不存在\n", Color.Red);
                return;
            }
            if (!dh.CheckExist("ngduty", "nd_name='" + mbr_dutyname.Text + "'"))
            {
                OperatResult.AppendText(">>责任别不存在\n", Color.Red);
                return;
            }
            if (!dh.CheckExist("solution", "so_name='" + so_name.Text + "'"))
            {
                OperatResult.AppendText(">>解决方案不存在\n", Color.Red);
                return;
            }

            //保存选择记录至后台，根据岗位资源代码记录

            dh.ExecuteSql("merge into DATAINPUTRECORD using (select NRG_NAME  from QUA_NGREASONGROUP where NRG_NAME = '" + nrg_name.Text + "') ON (NRG_NAME = DIR_COMMENT AND DIR_GROUP = '不良原因组' and DIR_SOURCECODE = '" + User.UserSourceCode + "') when matched then update set DIR_NUMBER = DIR_NUMBER +1 when not matched then insert (DIR_COMMENT,DIR_NUMBER,DIR_SOURCECODE,DIR_GROUP) VALUES (NRG_NAME,1,'" + User.UserSourceCode + "','不良原因组')", "select");
            dh.ExecuteSql("merge into DATAINPUTRECORD using (select nr_name  from QUA_NGReason left join QUA_NGREASONGROUPDET on nrgd_nrcode=nr_code left join QUA_NGREASONGROUP on nrgd_nrgid=nrg_id where nr_name = '" + nr_name.Text + "' and NRG_NAME = '" + nrg_name.Text + "') ON (nr_name = DIR_COMMENT AND DIR_GROUP = '不良原因' and DIR_SOURCECODE = '" + User.UserSourceCode + "') when matched then update set DIR_NUMBER = DIR_NUMBER +1 when not matched then insert (DIR_COMMENT,DIR_NUMBER,DIR_SOURCECODE,DIR_GROUP) VALUES (nr_name,1,'" + User.UserSourceCode + "','不良原因')", "select");
            dh.ExecuteSql("merge into DATAINPUTRECORD using (select nd_name  from ngduty where nd_name = '" + mbr_dutyname.Text + "') ON (nd_name = DIR_COMMENT AND DIR_GROUP = '责任别' and DIR_SOURCECODE = '" + User.UserSourceCode + "') when matched then update set DIR_NUMBER = DIR_NUMBER +1 when not matched then insert (DIR_COMMENT,DIR_NUMBER,DIR_SOURCECODE,DIR_GROUP) VALUES (nd_name,1,'" + User.UserSourceCode + "','责任别')", "select");
            dh.ExecuteSql("merge into DATAINPUTRECORD using (select so_name  from solution where so_name = '" + so_name.Text + "') ON (so_name = DIR_COMMENT AND DIR_GROUP = '解决方案' and DIR_SOURCECODE = '" + User.UserSourceCode + "') when matched then update set DIR_NUMBER = DIR_NUMBER +1 when not matched then insert (DIR_COMMENT,DIR_NUMBER,DIR_SOURCECODE,DIR_GROUP) VALUES (so_name,1,'" + User.UserSourceCode + "','解决方案')", "select");


            //保存不良原因
            sql.Clear();
            sql.Append("insert into makebadreason (mbr_mbid,mbr_id,mbr_brcode,mbr_solutioncode,");
            sql.Append("mbr_dutycode,mbr_brgcode,mbr_badcode,mbr_sncode,mbr_makecode,mbr_indate,");
            sql.Append("mbr_inman,mbr_brname,mbr_solutionname,mbr_badname,mbr_brgname,mbr_dutyname,mbr_remark) select '" + mb_id + "','" + mbr_id + "','" + nr_code.Text + "',");
            sql.Append("'" + so_code.Text + "','" + mbr_dutyname.Text + "','" + nrg_code.Text + "','" + bc_code.Text + "',");
            sql.Append("'" + ms_sncode.Text + "','" + ms_makecode.Text + "',sysdate,'" + User.UserCode + "','" + nr_name.Text + "','" + so_name.Text + "','" + bc_name.Text + "','" + nrg_name.Text + "','" + mbr_dutyname.Text + "','" + mb_badremark.Text + "' from dual");
            dh.ExecuteSql(sql.GetString(), "insert");
            if (mbc_component.Text != "")
            {
                sql.Clear();
                sql.Append("insert into makebadrscom (mbc_id,mbc_mbrid,mbc_component,mbc_badcode,");
                sql.Append("mbc_brcode,mbc_sncode,mbc_makecode,mbc_indate,mbc_inman ) values ");
                sql.Append("(makebadrscom_seq.nextval,'" + mbr_id + "' ,'" + mbc_component.Text + "',");
                sql.Append("'" + bc_code.Text + "','" + nr_code.Text + "','" + ms_sncode.Text + "','" + ms_makecode.Text + "',sysdate,'" + User.UserCode + "')");
                dh.ExecuteSql(sql.GetString(), "insert");
            }
            OperatResult.AppendText(">>不良原因保存成功\n", Color.Green);
            SaveRepairInf.Enabled = false;
            LoadBadInfTree(sender, e);
        }

        private void DeleteRepairInf_Click(object sender, EventArgs e)
        {
            DataTable dt = (DataTable)dh.ExecuteSql("select ms_makecode from makeserial where ms_id='" + msid + "' and ms_sncode='" + GetSNCode.Text + "' and ms_status=3", "select");
            if (dt.Rows.Count > 0)
            {
                if (mbr_id != "")
                {
                    string delete1 = "delete from makebadrsloc where mbl_mbrid='" + mbr_id + "'";
                    string delete2 = "delete from makebadrspart where mbp_mbrid='" + mbr_id + "'";
                    string delete3 = "delete from makebadrscom where mbc_mbrid='" + mbr_id + "'";
                    string delete4 = "delete from makebadreason where mbr_id='" + mbr_id + "'";
                    dh.ExecuteSQLTran(delete1, delete2, delete3, delete4);
                    OperatResult.AppendText(">>删除成功\n", Color.Green);
                    BaseUtil.CleanControlsText(bc_name, bc_code, bg_name, bg_code, mb_badremark, nrg_name, nrg_code, nr_name, nr_code, so_name, so_code, mbr_dutyname, mbr_dutycode, mbc_component);
                    mbp_partdgv.DataSource = null;
                    mbl_locdgv.DataSource = null;
                    mbr_id = "";
                    //删除后重新加载Tree的信息
                    LoadBadInfTree(sender, e);
                }
                else OperatResult.AppendText(">>必须选择不良原因\n", Color.Red);
            }
            else OperatResult.AppendText(">>" + GetSNCode.Text + "序列号错误，不存在或者不处于维修状态\n", Color.Red);
        }

        private void SaveBadLocation_Click(object sender, EventArgs e)
        {
            DataTable dt = (DataTable)dh.ExecuteSql("select ms_makecode from makeserial where ms_id='" + msid + "' and ms_sncode='" + GetSNCode.Text + "' and ms_status=3", "select");
            if (dt.Rows.Count > 0)
            {
                if (mbl_loc.Text != "")
                {
                    if (mbr_id != "")
                    {
                        if (!dh.CheckExist("makebadrsloc", "mbl_mbrid='" + mbr_id + "' and mbl_sncode='" + GetSNCode.Text + "' and mbl_loc='" + mbl_loc.Text.ToUpper() + "'"))
                        {
                            sql.Clear();
                            sql.Append("insert into makebadrsloc(mbl_id,mbl_mbrid,mbl_loc,mbl_badcode,mbl_brcode,");
                            sql.Append("mbl_sncode,mbl_makecode,mbl_indate ,mbl_inman) select makebadrsloc_seq.nextval," + mbr_id);
                            sql.Append(",'" + mbl_loc.Text.ToUpper() + "','" + bc_code.Text + "','" + nr_code.Text + "','" + GetSNCode.Text + "','" + macode + "',");
                            sql.Append("sysdate,'" + User.UserCode + "' from dual");
                            dh.ExecuteSql(sql.GetString(), "insert");
                            dt = (DataTable)dh.ExecuteSql("select mbl_id,mbl_loc from makebadrsloc where mbl_mbrid=" + mbr_id, "select");
                            BaseUtil.FillDgvWithDataTable(mbl_locdgv, dt);
                            sql.Clear();
                            sql.Append("with temp1 as (select bd_soncode,bd_location from bomdetail,bom where bo_id=bd_bomid ");
                            sql.Append(" start with bo_mothercode='" + ms_prodcode.Text + "' connect by bo_mothercode= prior bd_soncode) ");
                            sql.Append("select bd_soncode from temp1 where instr(','||bd_location||',','," + mbl_loc.Text.ToUpper() + ",')>0");
                            dt = (DataTable)dh.ExecuteSql(sql.GetString(), "select");
                            if (dt.Rows.Count > 0)
                            {
                                sql.Clear();
                                sql.Append("insert into makebadrspart(mbp_id,mbp_mbrid,mbp_part,mbp_badcode,");
                                sql.Append("mbp_brcode,mbp_sncode,mbp_makecode,mbp_indate,mbp_inman)");
                                sql.Append("select makebadrspart_seq.nextval," + mbr_id + ",'" + dt.Rows[0][0].ToString() + "',");
                                sql.Append("'" + bc_code.Text + "','" + nr_code.Text + "','" + GetSNCode.Text + "','" + macode + "',");
                                sql.Append("sysdate,'" + User.UserCode + "' from dual");
                                dh.ExecuteSql(sql.GetString(), "insert");
                                dt = (DataTable)dh.ExecuteSql("select mbp_id,mbp_part from makebadrspart where mbp_mbrid=" + mbr_id, "select");
                                BaseUtil.FillDgvWithDataTable(mbp_partdgv, dt);
                                mbl_loc.Clear();
                            }
                        }
                        else OperatResult.AppendText(">>已存在该不良位置\n", Color.Red);
                    }
                    else OperatResult.AppendText(">>请先选择不良原因\n", Color.Red);
                }
                else OperatResult.AppendText(">>不良位置不能为空\n", Color.Red);
            }
            else OperatResult.AppendText(">>" + GetSNCode.Text + "序列号错误，不存在或者不处于维修状态\n", Color.Red);
        }

        private void nr_name_TextChanged(object sender, EventArgs e)
        {
            if (nr_name.Text == "")
                SaveBadLocation.Enabled = false;
            else
                SaveBadLocation.Enabled = true;
        }

        private void mbl_loc_KeyDown(object sender, KeyEventArgs e)
        {
            if (e.KeyCode == Keys.Enter)
                SaveBadLocation_Click(sender, e);
        }

        private void prodcode_TextKeyDown(object sender, KeyEventArgs e)
        {
            if (e.KeyCode == Keys.Enter)
            {
                if (bd_soncode.Text != "")
                {
                    if (mbr_id != "")
                    {
                        sql.Clear();
                        sql.Append("insert into makebadrspart(mbp_id,mbp_mbrid,mbp_part,mbp_badcode,");
                        sql.Append("mbp_brcode,mbp_sncode,mbp_makecode,mbp_indate,mbp_inman)");
                        sql.Append("select makebadrspart_seq.nextval," + mbr_id + ",'" + bd_soncode.Text + "',");
                        sql.Append("'" + bc_code.Text + "','" + nr_code.Text + "','" + GetSNCode.Text + "','" + macode + "',");
                        sql.Append("sysdate,'" + User.UserCode + "' from dual");
                        dh.ExecuteSql(sql.GetString(), "insert");
                        DataTable dt = (DataTable)dh.ExecuteSql("select mbp_id,mbp_part from makebadrspart where mbp_mbrid=" + mbr_id, "select");
                        BaseUtil.FillDgvWithDataTable(mbp_partdgv, dt);
                    }
                    else OperatResult.AppendText(">>请先选择不良原因\n", Color.Red);
                }
                else OperatResult.AppendText(">>不良零件不能为空\n", Color.Red);
            }
        }

        private void cr_code_UserControlTextChanged(object sender, EventArgs e)
        {
            cd_stepcode.Condition = "ST_STATUSCODE='AUDITED' and cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' order by cd_stepno";
        }

        private void Clean_Click(object sender, EventArgs e)
        {
            OperatResult.Clear();
        }

        private void mbl_locdgv_CellContentClick(object sender, DataGridViewCellEventArgs e)
        {
            if (e.RowIndex >= 0)
            {
                if (mbl_locdgv.Columns[e.ColumnIndex].Name == "DeletePos")
                {
                    dh.ExecuteSql("delete from makebadrsloc where mbl_id='" + mbl_locdgv.Rows[e.RowIndex].Cells["mbl_id"].Value.ToString() + "'", "insert");
                    dt = (DataTable)dh.ExecuteSql("select mbl_id,mbl_loc from makebadrsloc where mbl_mbrid=" + mbr_id, "select");
                    BaseUtil.FillDgvWithDataTable(mbl_locdgv, dt);
                }
            }
        }

        private void mbp_partdgv_CellContentClick(object sender, DataGridViewCellEventArgs e)
        {
            if (e.RowIndex >= 0)
            {
                if (mbp_partdgv.Columns[e.ColumnIndex].Name == "DeleteCom")
                {
                    dh.ExecuteSql("delete from makebadrspart where mbp_id='" + mbp_partdgv.Rows[e.RowIndex].Cells["mbp_id"].Value.ToString() + "'", "insert");
                    DataTable dt = (DataTable)dh.ExecuteSql("select mbp_id,mbp_part from makebadrspart where mbp_mbrid=" + mbr_id, "select");
                    BaseUtil.FillDgvWithDataTable(mbp_partdgv, dt);
                }
            }
        }

        private void Make_Repair_FormClosing(object sender, FormClosingEventArgs e)
        {
            dh.Dispose();
        }

        private void ms_prodcode_TextChanged(object sender, EventArgs e)
        {
            if (ms_prodcode.Text != "")
                cr_code.Condition = "cr_prodcode='" + ms_prodcode.Text + "'";
            else
                cr_code.Condition = "";
            bd_soncode.Condition = "bd_mothercode='" + ms_prodcode.Text + "' and NVL(bd_usestatus,' ')<>'DISABLE'";
            //设置工序的条件
            cd_stepcode.Condition = "ST_STATUSCODE='AUDITED' and cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' order by cd_stepno";
        }

        public void RefreshData()
        {
            GetSNCode_KeyDown(new object(), new KeyEventArgs(Keys.Enter));
        }

        private void nr_name_UserControlTextChanged(object sender, EventArgs e)
        {
            if (nr_name.Text != "")
            {
                SaveBadLocation.Enabled = true;
                if (nrg_name.Text == "")
                {
                    OperatResult.AppendText(">>请先填写不良代码组\n", Color.Red);
                    nr_name.Text = "";
                }
                else
                {
                    if (nr_code.Text == "" || (nr_code.Text != "" && nr_code.Text != nr_name.Value))
                        nr_code.Text = nr_name.Value;
                }
            }
            else SaveBadLocation.Enabled = false;
        }

        private void nrg_name_UserControlTextChanged(object sender, EventArgs e)
        {
            if (nrg_code.Text == "" || (nrg_code.Text != "" && nrg_code.Text != nrg_name.Value))
                nrg_code.Text = nrg_name.Value;
            nr_name.Condition = "nrg_code in('" + (nrg_code.Text == "" ? "''" : nrg_code.Text) + "')";
        }

        private void mbr_dutyname_UserControlTextChanged(object sender, EventArgs e)
        {
            if (mbr_dutycode.Text == "" || (mbr_dutycode.Text != "" && mbr_dutycode.Text != mbr_dutyname.Value))
                mbr_dutycode.Text = mbr_dutyname.Value;
        }

        private void mbc_component_UserControlTextChanged(object sender, EventArgs e)
        {

        }

        private void so_name_UserControlTextChanged(object sender, EventArgs e)
        {
            if (so_code.Text == "" || (so_code.Text != "" && so_code.Text != so_name.Value))
                so_code.Text = so_name.Value;
        }

        private void BadCodeTree_AfterSelect(object sender, TreeViewEventArgs e)
        {
            if (e.Node.Level == 0)
            {
                mb_id = e.Node.Tag.ToString();
                BaseUtil.CleanControlsText(bc_name, bc_code, bg_name, bg_code, mb_badremark, nrg_name, nrg_code, nr_name, nr_code, so_name, so_code, mbr_dutyname, mbr_dutycode, mbc_component);
                mbl_locdgv.DataSource = null;
                mbp_partdgv.DataSource = null;
                bc_name.Text = BadInf_1[mb_id]["bc_name"];
                bc_code.Text = BadInf_1[mb_id]["mb_badcode"];
                bg_name.Text = BadInf_1[mb_id]["bg_name"];
                bg_code.Text = BadInf_1[mb_id]["mb_bgcode"];
                mb_badremark.Text = BadInf_1[mb_id]["mb_badremark"];
                mbr_id = "";
                SaveRepairInf.Enabled = true;
            }
            if (e.Node.Level == 1)
            {
                //展示父节点信息
                mb_id = e.Node.Parent.Tag.ToString();
                bc_code.Text = BadInf_1[mb_id]["mb_badcode"];
                bc_name.Text = BadInf_1[mb_id]["bc_name"];
                bg_code.Text = BadInf_1[mb_id]["mb_bgcode"];
                bg_name.Text = BadInf_1[mb_id]["bg_name"];
                //展示子节点信息
                mbr_id = e.Node.Tag.ToString();
                nrg_code.Text = BadInf_2[mbr_id]["nrg_code"];
                nrg_name.Text = BadInf_2[mbr_id]["nrg_name"];
                nr_code.Text = BadInf_2[mbr_id]["nr_code"];
                nr_name.Text = BadInf_2[mbr_id]["nr_name"];
                so_code.Text = BadInf_2[mbr_id]["so_code"];
                so_name.Text = BadInf_2[mbr_id]["so_name"];
                mbr_dutycode.Text = BadInf_2[mbr_id]["mbr_dutycode"];
                mbr_dutyname.Text = BadInf_2[mbr_id]["mbr_dutyname"];
                mbc_component.Text = dh.getFieldDataByCondition("makebadrscom", "mbc_component", "mbc_mbrid=" + mbr_id).ToString();
                //加载两个Grid的数据源
                DataTable dt = (DataTable)dh.ExecuteSql("select mbp_id,mbp_part from makebadrspart where mbp_mbrid=" + mbr_id, "select");
                BaseUtil.FillDgvWithDataTable(mbp_partdgv, dt);
                dt = (DataTable)dh.ExecuteSql("select mbl_id,mbl_loc from makebadrsloc where mbl_mbrid=" + mbr_id, "select");
                BaseUtil.FillDgvWithDataTable(mbl_locdgv, dt);
                SaveRepairInf.Enabled = false;
            }
        }
    }
}