namespace UAS_MES_NEW.Special
{
    partial class Special_CancelOQC
    {
        /// <summary>
        /// Required designer variable.
        /// </summary>
        private System.ComponentModel.IContainer components = null;

        /// <summary>
        /// Clean up any resources being used.
        /// </summary>
        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        protected override void Dispose(bool disposing)
        {
            if (disposing && (components != null))
            {
                components.Dispose();
            }
            base.Dispose(disposing);
        }

        #region Windows Form Designer generated code

        /// <summary>
        /// Required method for Designer support - do not modify
        /// the contents of this method with the code editor.
        /// </summary>
        private void InitializeComponent()
        {
            System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(Special_CancelImei));
            this.SN_label = new System.Windows.Forms.Label();
            this.bc_code = new System.Windows.Forms.Label();
            this.st_rstepcode_label = new System.Windows.Forms.Label();
            this.ma_craftcode_label = new System.Windows.Forms.Label();
            this.cd_stepcode = new UAS_MES_NEW.CustomControl.TextBoxWithIcon.SearchTextBox();
            this.cr_code = new UAS_MES_NEW.CustomControl.TextBoxWithIcon.SearchTextBox();
            this.OperateResult = new UAS_MES_NEW.CustomControl.RichText.RichTextAutoBottom();
            this.SaveRepairInf = new UAS_MES_NEW.CustomControl.ButtonUtil.NormalButton();
            this.SN = new UAS_MES_NEW.CustomControl.TextBoxWithIcon.EnterTextBox();
            this.cd_stepno = new System.Windows.Forms.Label();
            this.SuspendLayout();
            // 
            // SN_label
            // 
            this.SN_label.AutoSize = true;
            this.SN_label.Font = new System.Drawing.Font("微软雅黑", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
            this.SN_label.Location = new System.Drawing.Point(115, 90);
            this.SN_label.Margin = new System.Windows.Forms.Padding(4, 0, 4, 0);
            this.SN_label.Name = "SN_label";
            this.SN_label.Size = new System.Drawing.Size(62, 41);
            this.SN_label.TabIndex = 1;
            this.SN_label.Text = "SN";
            // 
            // bc_code
            // 
            this.bc_code.AutoSize = true;
            this.bc_code.Font = new System.Drawing.Font("微软雅黑", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
            this.bc_code.ForeColor = System.Drawing.Color.Black;
            this.bc_code.Location = new System.Drawing.Point(1391, 507);
            this.bc_code.Margin = new System.Windows.Forms.Padding(6, 0, 6, 0);
            this.bc_code.Name = "bc_code";
            this.bc_code.Size = new System.Drawing.Size(0, 41);
            this.bc_code.TabIndex = 146;
            this.bc_code.Visible = false;
            // 
            // st_rstepcode_label
            // 
            this.st_rstepcode_label.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom) 
            | System.Windows.Forms.AnchorStyles.Left)));
            this.st_rstepcode_label.AutoSize = true;
            this.st_rstepcode_label.Font = new System.Drawing.Font("微软雅黑", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
            this.st_rstepcode_label.Location = new System.Drawing.Point(115, 257);
            this.st_rstepcode_label.Margin = new System.Windows.Forms.Padding(6, 0, 6, 0);
            this.st_rstepcode_label.Name = "st_rstepcode_label";
            this.st_rstepcode_label.Size = new System.Drawing.Size(146, 41);
            this.st_rstepcode_label.TabIndex = 152;
            this.st_rstepcode_label.Text = "回流工序";
            // 
            // ma_craftcode_label
            // 
            this.ma_craftcode_label.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom) 
            | System.Windows.Forms.AnchorStyles.Left)));
            this.ma_craftcode_label.AutoSize = true;
            this.ma_craftcode_label.Font = new System.Drawing.Font("微软雅黑", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
            this.ma_craftcode_label.Location = new System.Drawing.Point(114, 177);
            this.ma_craftcode_label.Margin = new System.Windows.Forms.Padding(6, 0, 6, 0);
            this.ma_craftcode_label.Name = "ma_craftcode_label";
            this.ma_craftcode_label.Size = new System.Drawing.Size(146, 41);
            this.ma_craftcode_label.TabIndex = 153;
            this.ma_craftcode_label.Text = "回流途程";
            // 
            // cd_stepcode
            // 
            this.cd_stepcode.AllPower = "ifall";
            this.cd_stepcode.Caller = null;
            this.cd_stepcode.Condition = null;
            this.cd_stepcode.DBTitle = "回流工序";
            this.cd_stepcode.Font = new System.Drawing.Font("微软雅黑", 9F);
            this.cd_stepcode.FormName = null;
            this.cd_stepcode.Location = new System.Drawing.Point(279, 257);
            this.cd_stepcode.Margin = new System.Windows.Forms.Padding(6);
            this.cd_stepcode.Name = "cd_stepcode";
            this.cd_stepcode.Power = "ifspecial";
            this.cd_stepcode.ReturnData = null;
            this.cd_stepcode.SelectField = null;
            this.cd_stepcode.SetValueField = null;
            this.cd_stepcode.Size = new System.Drawing.Size(318, 44);
            this.cd_stepcode.TabIndex = 155;
            this.cd_stepcode.TableName = null;
            this.cd_stepcode.Tag = "";
            this.cd_stepcode.TextBoxEnable = false;
            // 
            // cr_code
            // 
            this.cr_code.AllPower = "ifall";
            this.cr_code.Caller = null;
            this.cr_code.Condition = null;
            this.cr_code.DBTitle = "回流途程";
            this.cr_code.Enabled = false;
            this.cr_code.Font = new System.Drawing.Font("微软雅黑", 9F);
            this.cr_code.FormName = null;
            this.cr_code.Location = new System.Drawing.Point(279, 177);
            this.cr_code.Margin = new System.Windows.Forms.Padding(6);
            this.cr_code.Name = "cr_code";
            this.cr_code.Power = "ifspecial";
            this.cr_code.ReturnData = null;
            this.cr_code.SelectField = null;
            this.cr_code.SetValueField = null;
            this.cr_code.Size = new System.Drawing.Size(318, 46);
            this.cr_code.TabIndex = 154;
            this.cr_code.TableName = null;
            this.cr_code.Tag = "ma_craftcode";
            this.cr_code.TextBoxEnable = false;
            // 
            // OperateResult
            // 
            this.OperateResult.Font = new System.Drawing.Font("微软雅黑", 10.5F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
            this.OperateResult.Location = new System.Drawing.Point(812, 50);
            this.OperateResult.Margin = new System.Windows.Forms.Padding(8);
            this.OperateResult.Name = "OperateResult";
            this.OperateResult.Size = new System.Drawing.Size(460, 614);
            this.OperateResult.TabIndex = 150;
            this.OperateResult.Text = "";
            // 
            // SaveRepairInf
            // 
            this.SaveRepairInf.AllPower = "ifall";
            this.SaveRepairInf.BackColor = System.Drawing.Color.Transparent;
            this.SaveRepairInf.DownImage = ((System.Drawing.Image)(resources.GetObject("SaveRepairInf.DownImage")));
            this.SaveRepairInf.Image = null;
            this.SaveRepairInf.IsShowBorder = true;
            this.SaveRepairInf.Location = new System.Drawing.Point(307, 449);
            this.SaveRepairInf.Margin = new System.Windows.Forms.Padding(6);
            this.SaveRepairInf.MoveImage = ((System.Drawing.Image)(resources.GetObject("SaveRepairInf.MoveImage")));
            this.SaveRepairInf.Name = "SaveRepairInf";
            this.SaveRepairInf.NormalImage = ((System.Drawing.Image)(resources.GetObject("SaveRepairInf.NormalImage")));
            this.SaveRepairInf.Power = null;
            this.SaveRepairInf.Size = new System.Drawing.Size(172, 48);
            this.SaveRepairInf.TabIndex = 145;
            this.SaveRepairInf.Tag = "IfRead";
            this.SaveRepairInf.Text = "确认回流";
            this.SaveRepairInf.UseVisualStyleBackColor = true;
            this.SaveRepairInf.Click += new System.EventHandler(this.SaveRepairInf_Click);
            // 
            // SN
            // 
            this.SN.AllPower = null;
            this.SN.BackColor = System.Drawing.Color.White;
            this.SN.ID = null;
            this.SN.Location = new System.Drawing.Point(279, 96);
            this.SN.Margin = new System.Windows.Forms.Padding(4);
            this.SN.Name = "SN";
            this.SN.Power = null;
            this.SN.Size = new System.Drawing.Size(318, 35);
            this.SN.Str = null;
            this.SN.Str1 = null;
            this.SN.Str2 = null;
            this.SN.TabIndex = 2;
            this.SN.KeyDown += new System.Windows.Forms.KeyEventHandler(this.SN_KeyDown);
            // 
            // cd_stepno
            // 
            this.cd_stepno.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom) 
            | System.Windows.Forms.AnchorStyles.Left)));
            this.cd_stepno.AutoSize = true;
            this.cd_stepno.Font = new System.Drawing.Font("微软雅黑", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
            this.cd_stepno.Location = new System.Drawing.Point(125, 343);
            this.cd_stepno.Margin = new System.Windows.Forms.Padding(6, 0, 6, 0);
            this.cd_stepno.Name = "cd_stepno";
            this.cd_stepno.Size = new System.Drawing.Size(0, 41);
            this.cd_stepno.TabIndex = 156;
            // 
            // Special_CancelImei
            // 
            this.AutoScaleDimensions = new System.Drawing.SizeF(12F, 24F);
            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
            this.ClientSize = new System.Drawing.Size(1384, 713);
            this.Controls.Add(this.cd_stepno);
            this.Controls.Add(this.cd_stepcode);
            this.Controls.Add(this.st_rstepcode_label);
            this.Controls.Add(this.ma_craftcode_label);
            this.Controls.Add(this.cr_code);
            this.Controls.Add(this.OperateResult);
            this.Controls.Add(this.bc_code);
            this.Controls.Add(this.SaveRepairInf);
            this.Controls.Add(this.SN);
            this.Controls.Add(this.SN_label);
            this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.None;
            this.Margin = new System.Windows.Forms.Padding(4);
            this.Name = "Special_CancelImei";
            this.Tag = "Special!CancelOQC";
            this.Text = "拆箱处理";
            this.Load += new System.EventHandler(this.Special_BoxSplit_Load);
            this.ResumeLayout(true);
            this.PerformLayout();

        }

        #endregion
        private System.Windows.Forms.Label SN_label;
        private CustomControl.TextBoxWithIcon.EnterTextBox SN;
        private System.Windows.Forms.Label bc_code;
        private CustomControl.ButtonUtil.NormalButton SaveRepairInf;
        private CustomControl.RichText.RichTextAutoBottom OperateResult;
        private CustomControl.TextBoxWithIcon.SearchTextBox cd_stepcode;
        private System.Windows.Forms.Label st_rstepcode_label;
        private System.Windows.Forms.Label ma_craftcode_label;
        private CustomControl.TextBoxWithIcon.SearchTextBox cr_code;
        private System.Windows.Forms.Label cd_stepno;
    }
}