mes-client/UAS_MES_LT/FunctionCode/Special/Special_Reset.cs

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using UAS_MES_NEW.DataOperate;
using UAS_MES_NEW.Entity;
using UAS_MES_NEW.PublicMethod;

namespace UAS_MES_NEW.Special
{
    public partial class Special_Reset : Form
    {
        DataHelper dh;

        LogStringBuilder sql = new LogStringBuilder();
        AutoSizeFormClass asc = new AutoSizeFormClass();
        DataTable Dbfind;
        DataTable dt;

        List<String> sb = new List<string>();

        public Special_Reset()
        {
            InitializeComponent();
        }

        private void Special_BoxSplit_Load(object sender, EventArgs e)
        {
       
            dh = SystemInf.dh;
            asc.controllInitializeSize(this);
            cd_stepcode.FormName = Name;
            cd_stepcode.TableName = "craftdetail left join step on st_code=cd_stepcode left join craft on cd_crid=cr_id";
            cd_stepcode.SetValueField = new string[] { "cd_stepcode", "cd_stepno" };
            cd_stepcode.SelectField = "cd_stepname # 工序名称 ,cd_stepcode # 工序编号,cd_stepno # 执行顺序";
            cd_stepcode.Condition = "ST_STATUSCODE='AUDITED' and cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' order by cd_stepno";
            cd_stepcode.DBTitle = "回流工序";
            cd_stepcode.DbChange += Cd_stepcode_DbChange;
        }

        private void Cd_stepcode_DbChange(object sender, EventArgs e)
        {
            Dbfind = cd_stepcode.ReturnData;
            BaseUtil.SetFormValue(this.Controls, Dbfind);
        }

        private void ReSN(string sncode, string stepcode)
        {
            string stname = dh.getFieldDataByCondition("step", "st_name", "st_code = '" + stepcode +  "'").ToString();
            dh.ExecuteSql("update makeserial set ms_status=1,ms_outboxcode='',ms_nextstepcode= '"+ stepcode + "' where ms_sncode='" + sncode + "'", "update");
            if (checkBox1.Checked)
            {
                dh.ExecuteSql("update makeserial set ms_key='',ms_keyid='',MS_HARDWREID='',MS_KEYSTATEID='',MS_BIOS='',ms_ec='',ms_uuid='',MS_KEYPARTNUMBER='',ms_bt='',ms_mac='',ms_imei='' where ms_sncode = '" + sncode + "' and ms_makecode = '" + ms_makecode.Text + "'", "update");
            }
            dh.ExecuteSql("delete makebad where mb_sncode = '" + sncode + "' and mb_status = 0", "delete");
            sql.Clear();
            sql.Append("update craftmaterial set cm_status=-1,cm_lastdeco=-1,cm_dropman='" + User.UserCode + "',");
            sql.Append("cm_dropdate =sysdate,CM_REMARK = '重置站点拆解',cm_dropstep='" + User.CurrentStepCode + "',");
            sql.Append("cm_dropsccode='" + User.UserSourceCode + "' where cm_sncode = '" + sncode + "' and cm_stepcode in (select cd_stepcode from craftdetail left join step on st_code=cd_stepcode left join craft on cd_crid=cr_id where ST_STATUSCODE='AUDITED' and cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' and cd_detno >=" + cd_stepno.Text + " )");
            dh.ExecuteSql(sql.GetString(), "update");
            LogicHandler.DoCommandLog(Tag.ToString(), User.UserCode, ms_makecode.Text, User.UserLineCode, User.UserSourceCode, "站点重置", "站点重置至" + stname,  sncode, "");
        }



        private void Split_Click(object sender, EventArgs e)
        {
            if (sb.Count == 0|| cd_stepcode.Text == "")
            {
                OperatResult.AppendText(">>采集数与回流工位不能为空\n", Color.Red);
                return;
            }
            string Delete = MessageBox.Show(this.ParentForm, "是否确认重置站点？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question).ToString();
            if (Delete == "Yes")
            {
                if (serBtn.Checked)
                {
                    for (int i = 0; i < sb.Count; i++)
                    {
                     ReSN(sb[i].ToString(), cd_stepcode.Text);
                     OperatResult.AppendText("SN：" + sb[i].ToString()+ "回流至"+ cd_stepcode.Text + "完成\n", Color.Green);
                    }
                    WeighRecord.Clear();
                    sb.Clear();
                }
                else if(bigboxBtn.Checked)
                {
                    string stname = dh.getFieldDataByCondition("step", "st_name", "st_code = '" + cd_stepcode.Text + "'").ToString();
                    for (int i = 0; i < sb.Count; i++)
                    {
                        DataTable dt2 = (DataTable)dh.ExecuteSql("select ms_sncode from makeserial where ms_outboxcode = '" + sb[i].ToString() + "'", "select");
                        for (int k = 0; k < dt2.Rows.Count; k++)
                        {
                            ReSN(dt2.Rows[k]["ms_sncode"].ToString(), cd_stepcode.Text);
                        }
                       dh.ExecuteSql("insert into PACKAGEBACKUP select * from package where pa_outboxcode='" + sb[i].ToString() + "'", "insert");
                       dh.ExecuteSql("insert into PACKAGEBACKUPDETAIL select * from packagedetail where pd_outboxcode='" + sb[i].ToString() + "'", "insert");
                       dh.ExecuteSql("delete from package where pa_outboxcode = '" + sb[i].ToString() + "'", "delete");
                        //删除箱的明细
                        dh.ExecuteSql("delete from packagedetail where pd_outboxcode='" + sb[i].ToString() + "'", "delete");
                        LogicHandler.DoCommandLog(Tag.ToString(), User.UserCode, ms_makecode.Text, User.UserLineCode, User.UserSourceCode, "站点重置", "站点重置至" + stname, sb[i].ToString(), "");
                        OperatResult.AppendText("卡通箱：" + sb[i].ToString() + "回流至" + cd_stepcode.Text + "完成\n", Color.Green);
                    }
                    WeighRecord.Clear();
                    sb.Clear();
                }
                sql.Clear();
                sql.Append("MERGE INTO makecraftdetail USING (select mcd_macode,mcd_detno,mcd_stepcode,mcd_stepname,nvl(count(distinct A.ms_sncode),0) n,nvl(count(distinct B.ms_sncode),0) bn,(select nvl(count(distinct sp_sncode),0) from STEPPASSED where SP_MAKECODE = mcd_macode AND SP_STEPCODE = mcd_stepcode) inqty from MAKECRAFTdetail");
                sql.Append(" left join makeserial A on mcd_macode = A.ms_makecode and mcd_stepcode = A.ms_nextstepcode AND A.MS_STATUS = 1 LEFT JOIN MAKESERIAL B ON mcd_macode = B.ms_makecode AND MCD_STEPCODE = B.MS_STEPCODE AND B.MS_STATUS = 3 where mcd_macode = '"+ ms_makecode.Text + "'  group by mcd_macode,mcd_detno, mcd_stepcode, mcd_stepname order by mcd_detno asc) A");
                sql.Append(" ON (makecraftdetail.MCD_MACODE = A.MCD_MACODE and makecraftdetail.mcd_stepcode = A.mcd_stepcode)  ");
                sql.Append(" WHEN MATCHED THEN UPDATE SET makecraftdetail.mcd_inqty = A.inqty,makecraftdetail.mcd_outqty = A.inqty,makecraftdetail.mcd_okqty = A.inqty ");
                dh.ExecuteSql(sql.GetString(), "update");

            }


        }

        private void bigboxBtn_Click(object sender, EventArgs e)
        {
            if (((RadioButton)sender).Checked == true)
            {
                if (WeighRecord.Items.Count > 0)
                {
                    string logout_confirm = MessageBox.Show(this.ParentForm, "是否更换采集项(已录入信息会清空)？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question).ToString();
                    if (logout_confirm == "Yes")
                    {
                        WeighRecord.Items.Clear();
                        sb.Clear();
                        ms_makecode.Text = "";
                        ms_prodcode.Text = "";
                        cr_code.Text = "";
                        cd_stepcode.Text = "";
                    }
                    else
                    {
                        serBtn.Checked = bigboxBtn.Checked;
                        bigboxBtn.Checked = !serBtn.Checked;
                    }
                }
                if (((RadioButton)sender).Name == "serBtn")
                {
                    input.Focus();
                    OperatResult.AppendText("请输入序列号进行采集\n", Color.Black, input);
                }
                else if (((RadioButton)sender).Name == "bigboxBtn")
                {
                    input.Focus();
                    OperatResult.AppendText("请输入箱号进行采集\n", Color.Black, input);
                }
            }
        }

        private void cr_code_TextChanged(object sender, EventArgs e)
        {
            cd_stepcode.Condition = "ST_STATUSCODE='AUDITED' and cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' order by cd_stepno";
        }

        private void input_KeyDown(object sender, KeyEventArgs e)
        {
            if (e.KeyCode == Keys.Enter)
            {
                if (serBtn.Checked)
                {
                    dt = (DataTable)dh.ExecuteSql("select ms_makecode,ms_prodcode,ms_sncode,ms_craftcode cr_code,ms_status,ms_outboxcode from makeserial where ms_sncode = '" + input.Text + "'", "select");
                    if (dt.Rows.Count > 0)
                    {
                        if (ms_makecode.Text != "" && dt.Rows[0]["ms_makecode"].ToString() != ms_makecode.Text)
                        {
                            OperatResult.AppendText("SN：" + input.Text + "所属工单" + dt.Rows[0]["ms_makecode"].ToString() + "与当前工单" + ms_makecode.Text + "不一致\n", Color.Red, input);
                            return;
                        }
                        if (dt.Rows[0]["ms_status"].ToString() == "3")
                        {
                            OperatResult.AppendText("SN：" + input.Text + "为不良品，不允许采集\n", Color.Red, input);
                            return;
                        }
                        if (dt.Rows[0]["ms_outboxcode"].ToString() != "")
                        {
                            OperatResult.AppendText("SN：" + input.Text + "已装箱" + dt.Rows[0]["ms_outboxcode"].ToString() + "，不允许采集\n", Color.Red, input);
                            return;
                        }
                        BaseUtil.SetFormValue(this.Controls, dt);
                        if (sb.Contains(dt.Rows[0]["ms_sncode"].ToString()))
                        {
                            OperatResult.AppendText("SN：" + input.Text + "已采集\n", Color.Red, input);
                            return;
                        }
                        WeighRecord.Items.Add(dt.Rows[0]["ms_sncode"].ToString());
                        sb.Add(dt.Rows[0]["ms_sncode"].ToString());
                        OperatResult.AppendText("SN：" + input.Text + "采集\n", Color.Green, input);
                        cd_stepcode.Condition = "ST_STATUSCODE='AUDITED' and cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' order by cd_stepno";
                    }
                    else
                    {
                        OperatResult.AppendText("SN：" + input.Text + "不存在\n", Color.Red, input);
                        return;
                    }
                }
                else if (bigboxBtn.Checked)
                {
                    dt = (DataTable)dh.ExecuteSql("select pa_makecode ms_makecode,pa_prodcode ms_prodcode,pa_outboxcode,pa_mothercode,ma_craftcode cr_code from package left join make on pa_makecode = ma_code where pa_outboxcode = '"+input.Text+"' and pa_type = '1'", "select");
                    if (dt.Rows.Count > 0)
                    {
                        if (ms_makecode.Text != "" && dt.Rows[0]["ms_makecode"].ToString() != ms_makecode.Text)
                        {
                            OperatResult.AppendText("SN：" + input.Text + "所属工单" + dt.Rows[0]["ms_makecode"].ToString() + "与当前工单" + ms_makecode.Text + "不一致\n", Color.Red, input);
                            return;
                        }
                        if (dt.Rows[0]["pa_mothercode"].ToString() != "")
                        {
                            OperatResult.AppendText("卡通箱：" + input.Text + "已装栈板" + dt.Rows[0]["pa_mothercode"].ToString() + "，不允许采集\n", Color.Red, input);
                            return;
                        }
                        BaseUtil.SetFormValue(this.Controls, dt);
                        if (sb.Contains(dt.Rows[0]["pa_outboxcode"].ToString()))
                        {
                            OperatResult.AppendText("卡通箱：" + input.Text + "已采集\n", Color.Red, input);
                            return;
                        }
                        WeighRecord.Items.Add(dt.Rows[0]["pa_outboxcode"].ToString());
                        sb.Add(dt.Rows[0]["pa_outboxcode"].ToString());
                        OperatResult.AppendText("卡通箱：" + input.Text + "采集\n", Color.Green, input);
                        cd_stepcode.Condition = "ST_STATUSCODE='AUDITED' and cr_code='" + cr_code.Text + "' and cr_prodcode='" + ms_prodcode.Text + "' order by cd_stepno";
                    }
                    else
                    {
                        OperatResult.AppendText("卡通箱：" + input.Text + "不存在\n", Color.Red, input);
                        return;
                    }
                }
            }
        }

        private void 数据清空_Click(object sender, EventArgs e)
        {
            BaseUtil.CleanControls(this.Controls);
            WeighRecord.Items.Clear();
            sb.Clear();
        }
    }
}